 |
Submitted articles |
|
| No | Article | Received | Status | Accepted | Vol (Issue) |
| M202 | Effects of SSR process on structure and mechanical properties of rheocast Al-7.1wt%Si alloy Mehdi Raeissi, Behzad Niroumand |
18.03.2016 | under review | ||
| M201 | Electrodeposition of Nb and Al from Chloroaluminate Melt on Vitreous Carbon Nataša M. Vukićević, Vesna S. Cvetković, Ljiljana S. Jovanović, Olga S. Radulović, Jovan N. Jovićević |
16.03.2016 | accepted | 25.03.2016 | |
| M200 | Complex sulphide-barite ore leaching in ferric chloride solution Miroslav Sokić, Vladislav Matković, Branislav Marković, Vaso Manojlović, Nada Štrbac, Dragana Živković, Željko Kamberović |
10.03.2016 | under review | ||
| M199 | Failure analysis of jet engine turbine blade Milan T. Jovanović, Vesna Maksimović, Ivana Cvijović-Alagić |
24.02.2016 | accepted | 04.03.2016 | 22(1) |
| M198 | 2-Amino-5-ethyl-1,3,4-thiadiazole as inhibitor of brass corrosion in 3% NaCl Milan Radovanović, Marija Petrović Mihajlović, Milan Antonijević |
24.02.2016 | accepted | 11.03.2016 | 22(1) |
| M197 b |
Effect of particle size on the froth floatation of Sokoto phosphate ore A.H. Umar, S.A. Yaro, M. Abdulwahab, M.R. Dodo |
19.01.2016 | accepted | 17.03.2016 | |
| M197 a |
Effect of reagent type on the froth floatation of sokoto phosphate ore A.H. Umar, S.A. Yaro, M. Abdulwahab, M.R. Dodo |
19.01.2016 | accepted | 17.03.2016 | |
| M196 | Effects of recrystallization annealing on mechanical properties of cold-rolled PdNi5 wires Aleksandra Ivanović, Biserka Trumić, Svetlana Ivanov, Saša Marjanović, Silvana Dimitrijević, Vesna Marjanović |
12.01.2016 | accepted | 08.03.2016 | 22(1) |
| M195 | Properties investigation of austempered ductile iron Sudhanshu Detwal, Deivanathan R |
28.12.2015 | accepted | 04.03.2016 | 22(1) |
| M194 | Thermomechanical behavior of comercial yellow gold alloy Miloš G. Djordjević, Mladen B. Mirić, Dragan M. Djordjević, Aleksandar R. Radivojević |
24.12.2015 | accepted | 09.03.2016 | 22(1) |
| M193 | Exploitation Properties of Ni-Pd/Al2O3 Catalyst Supported on Ceramic Foam Vesna Nikolić, Željko Kamberović, Zoran Anđić, Marija Korać, Miroslav Sokić, Nataša Gajić, Nikola Jovanović |
13.11.2015 | accepted | 30.11.2015 | 21(4) |
| M192 | The influence of novel organic gold complex on photoresist layers of printed circuit boards Silvana Dimitrijević, Zoran Stević, Mirjana Rajčić-Vujasinović, Vesna Grekulović, Stevan Dimitrijević, Biserka Trumić, Slađana Alagić |
12.11.2015 | accepted | 30.11.2015 | 21(4) |
| M191 | Investigating the cooling rate of cane molasses as quenching medium for 0.61% C high carbon steels M. R. Dodo, T. Ause, E. T Dauda |
11.11.2015 | accepted | 14.03.2016 | 22(1) |
| M190 | Analysis of waste oils from vehicle crankcases and gearboxes V. Pelitli, Ö. Doğan, H. J. Köroğlu |
23.10.2015 | under review | ||
| M189 | Effects of Processing Temperature on Reinforcement Formation in In-situ Al(Zn)/Al2O3(ZnO) Nanocomposite Ali Maleki, Behzad Niroumand, Mahmood Meratian |
20.10.2015 | accepted | 29.11.2015 | 21(4) |
| M188 | The Effect of Boron and Zirconium on Microstructure and Stress-Rupture Life of Nickel-based Superalloy ATI 718Plus Seyed Ali Hosseini, Seyed Mehdi Abbasi, Karim Zanganeh Madar |
10.10.2015 | accepted | 03.11.2015 | 21(4) |
| M187 | Investigation of copper(I) sulphide leaching in oxidative hydrochloric acid solution Branislav Marković, Miroslav Sokić, Željko Kamberović, Dragana Živković, Nada Štrbac, Vaso Manojlović |
30.09.2015 | accepted | 13.11.2015 | 21(4) |
| M186 | A novel and facile method for silica nanoparticles synthesis from high temperature vulcanization (HTV) silicon Mohammad Senemar, Ali Maleki, Behzad Niroumand, Alireza Allafchia |
30.09.2015 | accepted | 17.02.2016 | 22(1) |
| M185 | Hardness and microstructure of heat treated failed automobile brake disc Jamiu Odusote, Gafar Agodinrin, Segun Talabi |
22.09.2015 | under review | ||
| M184 | FTA analysis of the failure in the horizontal fluidity test Peter Blaško, Jozef Petrík |
04.06.2015 | accepted | 22.09.2015 | 21(4) |
| M183 | Development of hot rolled coils in S355J2+N grade with Si content <0.03% on Zelezara Smederevo hot strip mill Milić Ječmenica, Radovan Stefanović, Goran Vukićević |
25.05.2015 | accepted | 24.08.2015 | 21(3) |
| M182 | The effects of solution treatment on the microstructure of the cast Ni-based IN100 superalloy A. Jafari, S. M. Abbasi, A. Rahimi, M. Morakabati, M. Seifollahi |
10.05.2015 | accepted | 13.07.2015 | 21(3) |
| M181 | Cooling curve analysis in binary Al-Cu alloys: Part II- Effect of Cooling Rate and Grain Refinement on The Thermal and Thermodynamic Characteristics Mehdi Dehnavi, Mohsen Haddad-Sabzevar, Mohamad Hasan Avazkonnadeh-Gharavol |
25.04.2015 | accepted | 25.08.2015 | 21(3) |
| M180 | Transformer oils potential for PCBs contamination V. Pelitli, Ö. Doğan, H. J. Köroğlu |
21.04.2015 | rejected | 09.06.2015 | - |
| M179 | Inhibitive effect by Psidium guajava leaf extract on the corrosion of Al-Si-Mg (SSM-HPDC) alloy in simulated seawater environment M. Abdulwahab, L. M. Sani, S.A. Yaro, O.B.Umaru |
8.04.2015 | accepted | 09.10.2015 | 21(4) |
| M178 | Corrosion behavior of (Cu/Ni) functionally graded materials Alaa Abdulhasan Atiyah |
27.03.2015 | rejected | 24.08.2015 | - |
| M177 | A numerical analysis as a good tool for a prediction of final sulphur steel ladle content Z. Slović, Lj. Nedeljković, K. Raić, S. Dević |
15.03.2015 | accepted | 09.06.2015 | 21(3) |
| M176 | The Role of Mould Slags in Continuous Casting of Steels: A Review S. Moorthyram, Sankara Raman Sankaranarayanan |
11.03.2015 | rejected | 27.04.2015 | - |
| M175 | Increased resistance against UV and swelling polyurethane film Mohammad Roozbeh, Mehrzad Mortezaee, Saman Heydarian |
09.03.2015 | rejected | 16.06.2015 | - |
| M174 | Developing empirical relationships for predicting hardness and tensile behavior of friction stir welded pure copper joints using Response Surface Methodology Amir Mostafapour, Salar Salahi, Vahid Rezazadeh |
05.03.2015 | withdraw | 28.09.2015 | - |
| M173 | Review of the sealing components in Y-shaped joints of solid rockets Javad Darki, Jafar Eskandari Jam, Sayyed Hossein Taghavian |
04.03.2015 | rejected | 16.03.2015 | - |
| M172 | Cooling curve analysis in binary Al-Cu alloys: Part I- Effect of cooling rate and copper content on the eutectic formation M. Dehnavi, F. Kuhestani, M. Haddad-Sabzevar |
28.02.2015 | accepted | 25.08.2015 | 21(3) |
| M171 | Automatic quantitative analysis of microstructure of ductile cast iron using digital image processing Abhijit Malage, Priti P. Rege |
20.2.2015 | accepted | 20.07.2015 | 21(3) |
| M170 | The Effect of ZnO Addition on Microstructure, Phase and Color Developments of Copper Reduction Glaze N. Nayebpashaee, A.M. Arabi, H. Sarpoolaky, H. Vafaeenezhad |
16.2.2015 | accepted | 16.03.2015 | 21(2) |
| M169 | A soft computational approach for modeling and optimization of precipitation hardening treatment in 2XXX aluminum alloy N. Nayebpashaee, H. Vafaeenezhad, M.Reza Afshar, S. H. Seyedein, M. R. Aboutalebi |
4.02.2015 | under review | ||
| M168 | Ni-Pd/Al2O3 catalyst supported on reticulated ceramic foam for dry methane reforming Vesna Nikolić, Željko Kamberović, Marija Korać, Miroslav Sokić, Zoran Anđić |
30.01.2015 | accepted | 27.02.2015 | 21(1) |
| M167 | The effect of primary copper slag cooling rate on the copper valorization in the flotation process Aleksandar Mihajlović, Marija Korać, Željko Kamberović, Milorad Gavrilovski, Nikola Jovanović |
29.01.2015 | accepted | 04.05.2015 | 21(2) |
| M166 | Synthesis and characterisation of ultra-hard and lightweight AlMgB14–xTiB2 composites for wear-resistance and ballistic protection Varuzan Kevorkijan, Srečo Davorin Škapin |
29.01.2015 | accepted | 11.02.2015 | 21(1) |
| M165 | Effect of molybdenum addition on microstructure & mechanical properties of plain carbon steel weld Kunal Dwivedi, Jyoti Menghani |
29.01.2015 | under review | ||
| M164 | A Comparative Review Study on the Manufacturing Processes of Composite Grid Structures A. Fadavian, A. Davar, J. E. Jam, S. H. Taghavian |
28.01.2015 | accepted | 06.04.2015 | 21(2) |
| M163 | Fabrication Of Al 2024/SiC Nanocomposite with Al and Cu Pure Coatings P. Melali, A. Mashayekhi, M. Shahmiri |
19.01.2015 | accepted | 05.02.2015 | 21(2) |
| M162 | Effect of Stirring Speed and Flow Pattern on The Microstructure of A Rheocast Al-Mg Alloy P. Melali,P. Ashtijoo, B. Niroumand |
06.01.2015 | accepted | 20.01.2015 | 21(1) |
| M161 | Aluminothermic production of titanium alloys (Part 2): Impact of activated rutile on process sustainability S. Hassan-Pour, C. Vonderstein , M. Achimovicova, V. Vogt, E. Gock, B. Friedrich |
29.12.2014 | accepted | 06.06.2015 | 21(2) |
| M160 | Temperature Gradient In The Melt During Vertical Bridgman Solidification Method Srdjan Perišić, Ahmed Ali Awhida, Vesna Radojević, Dejan Davidović, Dejan Trifunović, Radmila Jančić Heinemann, Radoslav Aleksić |
07.11.2014 | accepted | 03.02.2015 | 21(1) |
| M159 | Influence of an accumulative roll bonding (ARB) process on the properties of AA5083 Al-Mg alloy sheets Ana Alil, Miljana Popović, Tamara Radetić, Endre Romhanji |
30.10.2014 | accepted | 28.11.2014 | 20(4)* |
| M158 | The Influence of the Chemical Composition on the Corrosion Performances of Some Al-Fe-Si, Al-Mg-Si and Al-Mg-Mn Type of Alloys Kemal Delijić, Boštjan Markoli, Iztok Naglič |
29.10.2014 | accepted | 26.11.2014 | 20(4)* |
| M157 | Nickel production in Serbia-technological and environmental aspects Željko Kamberović, Marija Korać, Zoran Anđić, Jelena Uljarević, Aleksandar Mihajlović, Dušan Vučurović |
25.10.2014 | accepted | 28.11.2014 | 20(4)* |
| M156 | The Role of SiO2 Gas in the Operation of Anti-Corrosion Coating Produced by PVD Meysam Zarchi, Shahrokh Ahangarani |
24.10.2014 | accepted | 28.08.2015 | 21(3) |
| M155 | Prediction of hardness and electrical properties in ZrB2 particle reinforced metal matrix composites using artificial neural network Jovana Ružić, Davor Antanasijević, Dušan Božić, Karlo Raić |
17.10.2014 | accepted | 20.11.2014 | 20(4)* |
| M154 | The use of electromagnetic field in designing the high quality Al alloys for hot forging process Zvonko Gulišija, Aleksandra Patarić, Marija Mihailović |
15.10.2014 | accepted | 24.11.2014 | 20(4)* |
| M153 | Impact of major alloying elements on the solodification parameters of cast hypoeutectic AlSi6Cu (1–4 wt.%) and AlSi8Cu(1−4 wt.%) alloys Mile B. Đurđević, Srećko Manasijević |
09.10.2014 | accepted | 23.11.2014 | 20(4)* |
| M152 | Synergy of energy resources of copper pyrometallurgy in RTB Bor-Serbia Milorad Ćirković, Vlastimir Trujić, Mile Bugarin |
29.09.2014 | accepted | 21.11.2014 | 20(4)* |
| M151 | Investigation of tribological properties of Al-Al2O3 composites fabricated by spark plasma sintering method Davod Khademi, Mehdi Dehnavi, A.Babakhani |
21.09.2014 | under review | ||
| M150 | Microstructure and impression creep characteristics Al-9Si-xCu aluminum alloys MohsenYousefi, Mehdi Dehnavi, S.M. Miresmaeili |
17.09.2014 | accepted | 05.04.2015 | 21(2) |
| M149 | Methods of improvement of forecasting of development of mineral deposits' power supply Alexander V. Putilov, Alexander G. Vorobev, Dmitriy V. Timokhin, Marina V. Bugaenko |
08.09.2014 | accepted | 06.10.2014 | 21(1) |
| M148 | Comparison between Thin-Film Transistors Deposited By Hot-Wire Chemical Vapor Deposition and PECVD Meysam Zarchi, Shahrokh Ahangarani |
20.08.2014 | accepted | 24.10.2014 | 21(1) |
| M147 | Synthesis of Y- Ni alloy by calciothermic reduction diffusion process Marimuthu Ilayaraja, L. John Berchmans, Sankara Raman Sankaranarayanan |
19.08.2014 | accepted | 26.03.2015 | 21(2) |
| M146 | Copper alloys with improved properties: standard ingot metallurgy vs. powder metallurgy Milan T. Jovanović, Višeslava Rajković, Ivana Cvijović-Alagić |
14.08.2014 | accepted | 04.09.2014 | 20(3) |
| M145 | The use of metallurgical slag as a by-product of the steel industry in chemical melioration of acid soils Aleksandra Stanojković-Sebić, Srboljub Maksimović, Dragana Jošić, Radmila Pivić |
07.08.2014 | accepted | 20.08.2014 | 20(3) |
| M144 | Grain size control in Al-4.8 wt.% Cu alloy by computer- aided cooling curve analysis Mehdi Dehnavi , Mohsen Haddad Sabzevar |
27.07.2014 | accepted | 17.08.2014 | 20(3) |
| M143 | On Texture, Microstructure and Pitting Resistance of AISI 316L Stainless Steel I. Berenjani, A. Bakhtiari, K. Raeissi, M. Shamanian, A. Saatchi |
22.07.2014 | under review | ||
| M142 | Investigation the parameters effects on the cobalt and nickel removal from industrial zinc sulfate electrolytes in arsenic activated process Bahram Behnajady, Javad Moghaddam |
21.07.2014 | rejected | ||
| M141 | Texture, microhardness and corrosion resistance of 316L stainless steel A. Bakhtiari, I. Berenjani, K. Raeissi, M. Shamanian, A. Saatchi |
23.06.2014 | accepted | 19.01.2015 | 21(1) |
| M140 | Semi-empirical optimization software for aluminothermic and carbothermic reactions processes Milorad Gavrilovski, Vaso Manojlović, Željko Kamberović, Marija Korać, Miroslav Sokić |
23.06.2014 | accepted | 03.09.2014 | 20(3) |
| M139 | Positive synergistic effect of the hazardous waste use for secondary lead metallurgy, energy efficiency and waste minimization Marija Štulović, Zoran Anđić, Marija Korać, Željko Kamberović |
21.06.2014 | accepted | 01.09.2014 | 20(3) |
| M138 | Quantitative Leaching of a Spent Cell Phone Printed Circuit Board by Hydrochloric acid Alafara A. Baba, Folahan A. Adekola, Oyebode O. Olumodeji, Misitura Lawal |
26.04.2014 | accepted | 30.05.2014 | 20(2) |
| M137 | Investigation the solidification of Al-4.8 wt.%Cu alloy at different cooling rate by computer-aided cooling curve analysis Mehdi Dehnavi , Hosein Vafaeenezhad, Mohsen Haddad Sabzevar |
04.04.2014 | accepted | 17.04.2014 | 20(2) |
| M136 | The relationship between surface treatments and corrosion resistance of hot-dip galvanized steel A. Bakhtiari |
20.03.2014 | accepted | 27.06.2014 | 20(3) |
| M135 | Space shuttle SRM field joint: Review paper S. Mohammad Gharouni, Hamid M. Panahiha, JafarEskandari Jam |
17.03.2014 | accepted | 10.07.2014 | 20(3) |
| M134 | Influence of annealing heat treatment on pitting corrosion resistance of stainless steel type 316 A. Bakhtiari, I. Berenjani |
14.03.2014 | accepted | 10.04.2014 | 20(2) |
| M133 | The influence of the chemical composition and type of alloy on corrosion performances of some medium strength Al-Mg-Si series of alloys Kemal Delijić, Boštjan Markoli |
13.03.2014 | accepted | 06.06.2014 | 20(2) |
| M132 | Thermal stress analysis of HVOF coating on 17-4 PH Steel B.Salehnasab, Gh.Farokhian, H.Nahidi, H.Zateajam |
08.02.2014 | under review | ||
| M131 | Aluminothermic Production of Titanium alloys (part 1):
Synthesis of TiO2 as input material M. Achimovičová, S. Hassan-Pour, E. Gock, V. Vogt, P. Baláž, B. Friedrich |
06.02.2014 | accepted | 28.05.2014 | 20(2) |
| M130 | Influence of chalcopyrite structure on their leaching by sodium nitrate in sulphuric acid Miroslav Sokić, Slobodan Radosavljević, Branislav Marković, Vladislav Matković, Nada Štrbac, Željko Kamberović, Dragana Živković |
04.02.2014 | accepted | 25.02.2014 | 20(1) |
| M129 | Properties of Silicon Dioxide Film Deposited By PECVD at Low Temperature/Pressure
Meysam Zarchi, Maryam Zare Sanjari, Shahrokh Ahangarani |
18.01.2014 | accepted | 24.03.2014 | 20(2) |
| M128 | Influence of reducing agents and surfactants on size and shape of silver fine powder particles Stevan Dimitrijević, Željko Kamberović, Marija Korać, Zoran Anđić, Silvana Dimitrijević, Nikola Vuković |
14.01.2014 | under review | 05.05.2014 | 20(2) |
| M127 | The effect of zinc bath temperature on the morphology, texture and corrosion behaviour of industrially produced hot-dip galvanized coatings A. Bakhtiari, M.R. Toroghinejad, F. Ashrafizadeh |
13.12.2013 | accepted | 18.02.2014 | 20(1) |
| M126 | Preparation of rare earth - transition metal (RE: Y, Tm: Co) intermetallic compounds by calciothermic reduction diffusion process M. Ilayaraja, L. John Berchmans, Sankara Raman Sankaranarayanan |
17.11.2013 | accepted | 16.12.2013 | 20(1) |
| M125 | Room temperature deformation of in-situ grown quasicrystals embedded in Al-based cast alloy Bostjan Markoli, Kemal Delijic, Neva Strekelj, Iztok Naglic |
21.10.2013 | accepted | 18.11.2013 | 19(4) |
| M124 | Effect of impurities on microstructure and structural propertiesof the as-cast and treated Al-Zn alloys Douniazed Lamrous, Emanuelle Boehm-Courjault, Mohamed Debili, Nacira Sassane |
21.10.2013 | accepted | 12.11.2013 | 20(1) |
| M123 | The influence of Mg content and impurities in AA5083 alloy on the properties of flow formed tubes Milutin Nikacevic, Ljubica Radovic, Branka Jordovic |
11.10.2013 | accepted | 06.11.2013 | 19(4) |
| M122 | The role of PECVD hard coatings on the performance of industrial tools Meysam Zarchi, Shahrokh Ahangarani, Shahrokh Ahangarani |
07.09.2013 | accepted | 10.12.2013 | 20(1) |
| M121 | Metal drawing goodness degree to which the Hollomon equation applies Živko Jokovic, Nina Djapic |
06.09.2013 | accepted | 03.03.2014 | 20(1) |
| M120 | The effect of the subcritical heat treatment on the microstructure and properties of Fe-Cr-C-V alloys Filipovic Mirjana, Kamberovic Zeljko, Korac Marija |
01.07.2013 | accepted | 02.02.2014 | 20(1) |
| M119 | A model for cross-referencing and calculating similarity of metal alloys Svetlana Pocajt, Mirjana Ristic, Aleksandra Peric-Grujic, Viktor Pocajt, Karlo Raic |
30.06.2013 | accepted | 07.10.2013 | 19(4) |
| M118 | Characterization of the SiO2 film deposited by using plasma enhanced chemical vapor deposition (PECVD) with TEOS/N2/O2 Meysam Zarchi, Maryam Zare Sanjari, Shahrokh Ahangarani |
25.06.2013 | accepted | 20.08.2013 | 19(4) |
| M117 | Preliminary study on auto-electrodeposition of copper, cadmium, nickel, and cobalt in acid and glycerol medium S.G.Viswanath, Manish M.Jachak |
20.06.2013 |
accepted | 12.08.2013 | 19(4) |
| M116 | Melting temperature of archaeometallurgical slag Jozef Petrik, Ludmila Burdzova |
17.06.2013 | accepted | 07.11.2013 | 19(4) |
| M115 | Dynamic Mechanical Properties of Aramid Fabrics Impregnated with Carbon Nanotube/Poly (Vinyl Butyral)/Ethanol Solution V. Obradovic, D. Stojanovic, M. Grkovic, I. Živkovic, V. Radojevic, P. Uskokovic, R. Aleksic |
17.06.2013 | accepted | 06.08.2013 | 19(3) |
| M114 | Arsenic in industrial waste water from copper production technological process Biljana Jovanović, Milana Popović |
12.06.2013 | accepted | 02.10.2013 | 19(4) |
| M113 | Numerical predicting of recycling friendly wrought aluminium alloy compositions Varužan Kevorkijan |
05.06.2013 | accepted | 27.06.2013 | 19(3) |
| M112 | Free vibration analysis of functionally graded nanocomposite cylindrical panel reinforced by carbon nanotube J. E. Jam, A. Pourasghar, S. Kamarian, Nader Namdaran |
11.05.2013 | accepted | 04.06.2013 | 19(3) |
| M111 | Analysis of metal ion release from biomedical implants Ivana Dimic, Ivana Cvijovic-Alagic, Marko Rakin, Branko Bugarski |
23.04.2013 | accepted | 13.05.2013 | 19(2) |
| M110 | Diffusion Brazing of Ti-6Al-4V and Stainless Steel 316L Using AgCuZn Filler Metal R. Soltani Tashi, S. A. A. Akbari Mousavi, M. Mazar Atabaki |
21.04.2013 | accepted | 08.05.2013 | 19(3) |
| M109 | Analysis of copper losses throughout weak acid effluent flows generated during off-gas treatment in the New Copper Smelter RTB Bor Dragana Ivšić-Bajčeta, Željko Kamberović, Jelena Rogan, Milorad Ćirković, Toplica Pavlović |
08.04.2013 | accepted | 18.07.2013 | 19(3) |
| M108 | Electrodeposition of nickel powder from nickel sulphate solution in presence of glycerol and sulphuric acid S.G. Viswanath, Manish M.Jachak |
21.02.2013 | accepted | 15.05.2013 | 19(3) |
| M107 | Foundry industry impact on the environment Nafija Šehić-Mušić, Šefket Goletić, Derviš Pihura, Lejla Mušić, Kadrija Hasanović |
18.01.2013 | rejected | ||
| M106 | Mechanical behaviour of Al-Mg-Si matrix composites reinforced with alumina and bamboo leaf ash K. K. Alaneme, E. O. Adewuyi |
13.01.2013 | accepted | 29.03.2013 | 19(3) |
| M105 | The effect of concentration of glycerol and electric current on the morphology and particle size of electrodeposited cadmium powder S.G.Viswanath, M.M.Jachak |
17.12.2012 | accepted | 03.01.2013 | 19(2) |
| M104 | Influence of different cyclic intercritical heat treatment schedules on the microstructure and mechanical behaviour of a medium carbon low alloy steel K. K. Alaneme, O. J. Adejumo, J. O. Borode |
27.11.2012 | accepted | 03.02.2013 | 19(2) |
| M103 | Effect of volume fraction of (Cr, Fe)7C3 carbides on corrosion resistance of the Fe-Cr-C hardfacing alloys at Cr/C=6 Hamed Sabet, Shamsedin Mirdamadi, Shahram Kheirandish, Masoud Goodarzi |
24.09.2012 | accepted | 30.01.2013 | 19(2) |
| M102 | Comparison of Oxidation Resistance of YSZ and YSZ-Alumina Coatings on Ni-based Superalloy Mehdi Ghobeiti Hasab |
05.09.2012 | accepted | 13.11.2012 | 19(2) |
| M101 | Preparation of electrolytic copper powder by electrodeposition from copper sulphate solution in presence of glycerol and sulfuric acid medium and the study of morphology of the powder S.G.Viswanath, M.M.Jachak |
30.08.2012 | accepted | 10.12.2012 | 19(2) |
| M100 | The non-destructive prediction of the aluminium content in pressed skulls of aluminium dross Varuzan Kevorkijan, Srečo Davor Škapin, Uroš Kovačec |
30.08.2012 | accepted | 20.09.2012 | 18(4) |
| M99 | Microstructural study of Al-20Si-5Fe alloys produced by Melt-spinning Process Aliyeh Rafiei, Nasser Varahram, Parviz Davami |
23.08.2012 | accepted | 25.10.2012 | 19(1) |
| M98 | Microstructural characterization of thermal barrier coating on Inconel 617 after high temperature oxidation M. R. Daroonparvar, M. Mazar Atabaki |
31.07.2012 | accepted | 09.11.2012 | 19(2) |
| M97 | Phase Transformation Modeling of 42CrMo4 Steel Rods during Quenching Amirhossein Meysami |
30.07.2012 | rejected | - | |
| M96 | Concepts in Surface Alloying of Metals Dr. Santosh S. Hosmani |
10.07.2012 | accepted | 20.07.2012 | 19(1) |
| M95 | An exact solution of mechanical buckling for functionally graded material bimorph circular plates Jafar Eskandari Jam, Mahmood Khosravi, Nader Namdaran |
25.06.2012 | accepted | 20.07.2012 | 19(1) |
| M94 | Influence of welding parameters on residual stresses in dissimilar HSLA steels welds E. Ranjbarnodeh, M. Pouranvari, A. Fischer |
20.06.2012 | accepted | 23.08.2012 | 19(1) |
| M93 | Effect of solidification cooling rate on structural and mechanical properties of AlSi12 alloy Srba Mladenović, Ljubica Ivanić, Dragoslav Gusković, Saša Marjanović |
18.06.2012 | withdrawn | - | |
| M92 | The study of some physico-chemical properties of melt KCl – NaCl mixture Vojtech Špeťuch, Jozef Petrík, Eva Grambálová |
15.05.2012 | accepted | 25.06.2012 | 19(1) |
| M91 | Stainless steel in contact with food and bevarage Sveto Cvetkovski |
13.04.2012 | accepted | 23.05.2012 | 18(4) |
| M90 | 3D Simulation of the cold extrusion process of non-symmetric section of tellurium-lead J. E. Jam, M. Gh. Zadeh |
22.03.2012 | accepted | 25.07.2012 | 19(1) |
| M89 | Corrosion of steels induced by microorganisms Biljana S. Maluckov |
28.02.2012 | accepted | 03.04.2012 | 18(3) |
| M88 | Investigation of gating parameters, temperature and density effects on mold filling in the LFC process by direct observation method A. Sharifi, M. Mansouri Hasan Abadi |
24.02.2012 | accepted | 26.10.2012 | 19(1) |
| M87 | Physico-chemical characterization of archaeometallurgical findings from two localities near Bor (Serbia) Dragana Živković, Nada Štrbac, Miroslav Sokić, Velibor Andrić, Branka Andjelić, Igor Jovanović, Marija Jovičić, Dušica Nikolić |
19.01.2012 | accepted | 20.02.2012 | 18(2) |
| M86 | Determination LHP of axisymmetric transient Molybdenum steel-4037H quenched in sea water by developing 1-d mathematical model Abdlmanam S. A. Elmaryami, Badrul Omar |
18.01.2012 | accepted | 04.04.2012 | 18(3) |
| M85 | The morphology of ductile cast iron surface damaged by cavitation Marina Dojcinovic, Olivera Eric, Dragan Rajnovic, Leposava Sidjanin, Sebastijan Baloš |
15.11.2011 | accepted | 15.01.2012 | 18(3) |
| M84 | Electrowinning of nickel powder from glycerol and ammonical medium -study of morphology and nano-nature of the powder S.G. Viswanath, Sajimol George |
21.12.2011 | accepted | 19.01.2012 | 18(2) |
| M83 | Corrosion of two archaeological artifacts made of wrought iron Bore Jegdic, Suzana Polic-Radovanovic, Slavica Ristic, Ana Alil |
05.12.2011 | accepted | 23.04.2012 | 18(3) |
| M82 | An industrial thermogravimetric/differential thermal analysis (TG/DTA) for measuring humidity and organic content in incoming aluminium scrap Varužan Kevorkijan, Sreco Davor Škapin, Urban Došler |
28.10.2011 | accepted | 07.11.2011 | 18(2) |
| M81 | Protection mechanisms for blast furnace crucible using titanium oxides J.Mochón, M.J.Quintana, I.Ruiz-Bustinza, R.González, E.Marinas, M.A.Barbés, L.F.Verdeja |
27.10.2011 | accepted | 16.01.2012 | 18(3) |
| M80 | Bioactive coating on Ti-6Al-4V and stainless steel 316 L-A comparison Sajjad Jafari, Mehdi Mazar Atabaki, Jamaliah Idris |
13.10.2011 | accepted | 23.12.2011 | 18(2) |
| M79 | Prediction of GMAW droplet temperature using finite element method and comparison with semi-empirical model Eslam Ranjbarnodeh, Majid Pouranvari, Alireza Rahimnejad |
29.09.2011 | accepted | 26.03.2012 | 18(3) |
| M78 | Effect of heating rate on the partial transient liquid phase diffusion bonded Al/Mg2Si metal matrix composite and magnesium alloy (AZ91D) couple M. Mazar Atabaki, A.H. Meisami |
26.09.2011 | accepted | 07.11.2011 | 18(2) |
| M77 | Thermal and Mechanical Properties of High Alumina Cement Castable S. Martinovic, M. Vlahovic, J.Majstorovic, B. Matovic, T. Volkov-Husovic |
15.09.2011 | accepted | 05.12.2011 | 18(1) |
| M76 | Effect of preweld surface modification using friction stir processing of in738 superalloy on the liquation cracking of autogenous laser welds Seyed Mostafa Mousavizade, Farshid Malek Ghaini |
20.08.2011 | accepted | 18.09.2011 | 18(1) |
| M75 | Preparation of core foamed al panels Varužan Kevorkijan, Uroš Kovačec, Irena Paulin, Srečo Davor Škapin, Monika Jenko |
20.08.2011 | accepted | 27.09.2011 | 18(1) |
| M74 | Transient liquid phase diffusion bonding of stainless steel 304 using copper and aluminium filler interlayers M. Mazar Atabaki, J. Noor Wati, J. Bte Idris |
19.08.2011 | accepted | 05.04.2012 | 18(3) |
| M73 | Evolution of plastic strains in dissimilar weld of stainless steel to carbon steel Eslam Ranjbarnodeh, Mehdi Farajpour |
16.08.2011 | accepted | 15.09.2011 | 18(1) |
| M72 | Preparation of nanogold labeled goat-anti-rabbit igg and their application in an immunoassay Bianmei Cao, Tingfei Xi, David Hui |
16.08.2011 | withdrawn | 23.09.2011 | - |
| M71 | Comparative study on the corrosion resistance of Zn-0.2 Pb and Zn-0.5 Sb galvanized coatings A. Bakhtiari, H.R. Asgari |
18.07.2011 | accepted | 10.09.2011 | 18(2) |
| M70 | Mathematical Modeling for 34crmo4 steel during Hot Compression S.V. Sajadifar, M. Ketabchi, and M. Nourani |
23.06.2011 | accepted | 26.09.2011 | 18(1) |
| M69 | Simultaneous recovery of total iron and titanium from ilmenite ore by hydrometallurgical processing Alafara A. Baba, Folahan A. Adekola, Olayide A. Arodola, Lateef Ibrahim, Rafiu B.Bale, Malay K. Ghosh, Abdul R. Sheik |
20.06.2011 | accepted | 15.11.2011 | 18(1) |
| M68 | Effects of a small addition of Mn on modifying the coating thickness, structure and corrosion resistance of hot-dip galvanized coatings Amirreza Bakhtiari |
17.06.2011 | accepted | 28.07.2011 | 18(1) |
| M67 | Hydrometallurgical process for extraction of metals from electronic waste-part ii: Development of the processes for the recovery of copper from printed circuit boards (PCB) Željko Kamberović, Marija Korać, Milisav Ranitović |
13.06.2011 | accepted | 15.08.2011 | 17(3) |
| M66 | Experimental investigation of non-uniform deformation in tube hydroforming Miroslav Plančak, Karl Kuzman, Dragiša Vilotić, Tomaž Pepeljnjak, Igor Kačmarčik, Dejan Movrin |
13.05.2011 | accepted | 13.06.2011 | 17(3) |
| M65 | Unsteady state computer simulation of 2 chromium steel at 925°c as austenitizing temperature to determine LHP Abdlmanam S. A. Elmaryami, Haji Badrul Bin Omar |
13.06.2011 | accepted | 12.12.2011 | 18(2) |
| M64 | Welding of ultra high-strength steel (UHSS) with austenitic metal powder wire (MPW) Sveto Cvetkovski, Rudolf Vallant, Klaus Kerschbaumer |
13.06.2011 | accepted | 15.09.2011 | 17(4) |
| M63 | Corrosion behavior of heat treated nickel-aluminium bronze alloy in artificial seawater M.R. Daroonparvar, Mazar Atabaki, A. Vakilipour |
06.06.2011 | accepted | 19.09.2011 | 17(4) |
| M62 | The role of parameters controlling service life of downhole drilling motors power section Meysam Zarchi, |
23.05.2011 | accepted | 15.09.2011 | 17(4) |
| M61 | Diffusion brazing of a nickel based superalloy Part4: effect of bonding temperature Majid Pouranvari, |
20.05.2011 | accepted | 15.09.2011 | 17(4) |
| M60 | Abrasive wear behavior of high chromium cast iron and Hadfield steel S. Jafari, M. Mazar Atabaki, H. Abdollahpour |
09.04.2011 | rejected | - | - |
| M59 | Core wire for automatic (manless) alloying of iron in al alloys through the charge well of electromagnetic pump Varužan Kevorkijan, |
15.03.2011 | accepted | 10.04.2011 | 17(3) |
| M58 | Corrosion behavior of copper in the presence of proteins Bianmei Cao, Tingfei Xi, Yudong Zheng, David Hui |
13.03.2011 | accepted | 09.05.2011 | 17(3) |
| M57 | Diffusion brazing of a nickel based superalloy Part 3 effect of post bond heat treatment Majid Pouranvari, |
21.12.2010 | accepted | 04.02.2011 | 17(2) |
| M56 | Preparation of nanogold labeled goat-anti-rabbit igg and their application in an immunoassay Bianmei Cao, Tingfei Xi, David Hui |
04.03.2011 | accepted | 09.05.2011 | 17(2) |
| M55 | Characterisation of intermetallic inclusions obtained by dissolution of iron alloying additives in molten aluminium Varužan Kevorkijan, |
29.12.2011 | accepted | 28.02.2011 | 17(1) |
| M54 | Prediction of Failure mode in AISI 304 Resistance Spot Welds Majid Pouranvari |
27.12.2010 | accepted | 21.02.2011 | 17(1) |
| M53 | Electrowinning of zinc from ammonia and glycerol Bath and study of the morphology of zinc deposit S.G. Viswanath, Sajimol George |
05.02.2011 | accepted | 17.03.2011 | 17(2) |
| M52 | Corrosion Study of Metallic Biomaterials in Simulated Body Fluid Hamid Reza Asgari Bidhendi, Majid Pouranvari |
27.12.2010 | accepted | 21.02.2011 | 17(1) |
| M51 | Effect of the heat treatment on the microstructural evolution of the nickel based superalloy Mohamed Retima, Saida Bouyegh, Hacène Chadli |
29.11.2010 | accepted | 28.03.2011 | 17(2) |
| M49 | Experimental Investigation and Calculation of Shear Rate, Shear Stress and Power for Mixing of Semi-Solid Mixtures of ZA27 Alloy and ZA27/Al2O3 Composites with Large Al2O3 Particles Biljana Bobic, Miroslav Babic, Slobodan Mitrovic, Ilija Bobic, Milan T. Jovanovic |
15.10.2010 | accepted | 25.11.2010 | 17(1) |
